[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [3FE] Re: I hate this freakin thing! still runs like CRAP! EGR block off

found a pic of the 2f EGR, yep its long. What did you use for a gasket?

>On a 2f the tube is about 6". I made a flange out of scrap steel.
>-----Original Message-----
>From: effjay62 [mailto:ken.flesher@xxxxxxx]
>Sent: Wednesday, August 18, 2004 10:22 AM
>To: 3FE@xxxxxxxxxxxxxxx
>Subject: [3FE] Re: I hate this freakin thing! still runs like CRAP! EGR
>block off
>Are you SURE you pulled the EGR off? Never seen one that had a pipe
>extending into the intake, normally it's just a flat cast iron flange
>that bolts to the side of the intake somewhere. Never had the one off
>my 3FE though. I'd go outside and pull it off now, but I don't wanna
>spoil the gasket.
>BTW, the cold start injector is the smaller thing just above the EGR
>valve. Now, it DOES have a pipe part that sticks into the intake.
>Uhhhh....  you didn't pull that off, did you?
>--- In 3FE@xxxxxxxxxxxxxxx, "John Holmaas" <jholmaas@xxxx> wrote:
> > OK, so I went out and pulled the egr off the intake, problem is how
>do I block it off, there is a pipe that goes from the egr into the
>intake(1/2" hole), unless the pipe is cutt off I don't see how I can
>insert some alum to block it off? or am I missing something?
> >
> > John
>Yahoo! Groups Links

------------------------ Yahoo! Groups Sponsor --------------------~--> 
Yahoo! Autos. Everything you need to know about buying 
or selling a car.  FREE Quotes, 360° Tours, Research,
Blue Book, Compare Vehicles, Buy Used

Yahoo! Groups Links

<*> To visit your group on the web, go to:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo! Groups is subject to:




Toyota Land Cruiser Association